Proximity inductive Sensor LJ18A3-8-Z/BY

Proximity inductive Sensor LJ18A3-8-Z/BY in Pakistan

Here’s an image of the LJ18A3-8-Z/BY inductive proximity sensor (M18, 8 mm detection, PNP, Normally Open)—ideal for use on your website to give visitors a clear visual reference.

Product Details (for Website)

General Specifications – LJ18A3-8-Z/BY

• Model: LJ18A3-8-Z/BY (part of LJ18A3‑8 series) finglai.com+1tronic.lk

• Housing: M18 × 68 mm threaded cylinder; brass nickel‑plated body, ABS sensing surface finglai.com+1tronic.lkJAARIS Automation

• Installation: Non‑shielded (unshielded) construction finglai.comRobu

• Detection Distance: 8 mm ± 10% (setting distance ~6–7 mm) finglai.comtronic.lkRobu

• Operating Voltage: DC 6–36 V finglai.comtronic.lkAmazonRobu

• Output Type: PNP, Normally Open (NO) (3‑wire) finglai.comAmazontronic.lk

• Max Output Current: 300 mA finglai.comtronic.lkAmazon

• Response Frequency: ~500 Hz finglai.com+1tronic.lk

• Indicator: Red LED feedback when activated finglai.comtronic.lk

• Protection: Reverse polarity protected; short-circuit protection varies per vendor finglai.comLK Tronicstronic.lk

• Insulation & Durability:

  • Insulation resistance ≥ 50 MΩ

  • Dielectric strength: 1000 VAC, 1 min (between electrical parts and housing) finglai.comtronic.lk

• Ingress Protection: IP65 (dust-tight, splash resistant) finglai.comRobu

• Operating Temperature: –25 °C to +70 °C finglai.com+1Robu

• Cable: ~1.2 m PVC cable, 3-wire; Brown = +V, Blue = GND, Black = Output signal finglai.comLK TronicsAmazon

• Mechanical Specs:

  • Body: ~60–68 mm length

  • Resistant to vibration/shocks (supplier-dependent) LK Tronics

• Applications: Industrial automation, CNC, robotics, 3D printers (e.g., auto bed leveling), conveyor control, non-contact detection YUYONG INDUSTRY -LK TronicsReddit

How to Use

1. Mounting:

   • Thread into M18 nut or mounting bracket until the desired sensing point is aligned.

   • As a non‑shielded sensor, ensure nearby metallic interference is minimized. finglai.comRobu

2. Wiring:

   • Brown → +V (DC 6–36 V)

   • Blue → 0 V (Ground)

   • Black → Signal Output (connects to PLC, microcontroller, etc.) LK TronicsAmazon

3. Operation:

   • Place a metal target within ~8 mm of the sensing face. The sensor will output PNP high and light the red LED. finglai.comAmazon

   • Removal of object resets the output to low.

4. Setup Tips:

   • Leave at least 20% of detection distance as margin to account for hysteresis and ensure stable switching. LK Tronics

   • Test detection using a ferrous metal target (e.g., steel); expect up to 60% reduced detection range for non-ferrous materials like aluminum or brass. Wikipediafinglai.com

5. Use Case Highlight:

   • On Reddit, one user shared how they wire the sensor for auto bed leveling on 3D printers:

     “The probe has 3 wires brown black and blue… No need for resistors… simply plug and play.” Reddit

Key Features Summary