Autonics Multifunctional Sensor Controller PA10-U

Description

Autonics Multifunctional Sensor Controller PA10-U in Pakistan

Here’s an image of the Autonics PA10‑U Multifunctional Sensor Controller—a compact DIN-rail module offering flexible control logic, inputs, and timing options.

Product Details for Website

The Autonics PA10‑U is a high-performance, multifunctional sensor controller designed to process inputs from two NPN-type sensors, executing flexible logic and timing control, and delivering outputs via relay and open-collector transistors.

Specifications & Key Features

• Input Logic & Sensors

  • Accepts two NPN open-collector sensor inputs with options for logic combination (AND/OR), signal inversion, and derivative action on input 2 AutonicsDubai Sensor.

  • Supplies 12 V DC (≈ 200 mA) to power external sensors AutonicsDubai Sensor.

• Power Supply

  • Operates on a wide input voltage range: 100–240 VAC, 50/60 Hz.

  • Power consumption is modest, up to 10 VA AutonicsDubai Sensor.

• Operation Modes

  • Offers 13 configurable modes via DIP switches, including ON-delay, OFF-delay, one-shot delay, flicker, low/high-speed detection, normal, flip-flop, encoder, and more AutonicsDubai Sensor.

• Outputs

  • Relay Output: SPDT (1 c), rated for switching loads up to 250 VAC, 3 A (resistive) ManualsLibDubai Sensor.

  • Transistor Outputs: Two NPN open-collector outputs (max 30 V DC, 100 mA) ManualsLibDubai Sensor.

• Performance

  • Fast response: up to 10 ms relay switching, 0.05 ms for transistor (in encoder mode) Dubai SensorTwittlebit.

  • Durable: mechanical life ≥ 10 million cycles; electrical life ≥ 100,000 cycles Dubai Sensor.

• Installation & Environment

  • Compact footprint (~150 g), mountable on DIN rail or panel TwittlebitDubai Sensor.

  • Operating conditions: –10 °C to +55 °C, humidity 35–85% RH (non-condensing) Dubai Sensor+1.

How to Use the PA10‑U

1. Mounting

Install the unit on a DIN rail or panel in your control cabinet with at least 10 mm spacing to allow heat dissipation ManualsLibDubai Sensor.

2. Wiring

• Power Connection: Connect 100–240 VAC to the designated power terminals.

• Sensor Inputs:

  • Supply external sensors with 12 V DC (≤ 200 mA).

  • Wire sensor outputs to IN1 and IN2. Use DIP switches to configure logic (AND/OR), inversion (NORM/INV), and derivative action for IN2 ManualsLibDubai Sensor.

3. Configure Operation Mode

• Choose from 13 operation modes via DIP switches:

  • Examples: ON-delay (trigger output after a delay), Flip‑Flop (toggle output state each activation), Encoder mode (counts pulses) AutonicsManualsLibDubai Sensor.

• Adjust timing or frequency coefficients using additional switches and timer knobs ManualsLibDubai Sensor.

4. Output Integration

• Use the relay output to drive higher-power devices (e.g., lights, motors).

• Use transistor outputs for logic-level signaling or interfacing with PLC inputs ManualsLibDubai Sensor.

5. Indicators

• LEDs show power-on, input trigger status, and output activation—helpful during setup and diagnostics ManualsLibDubai Sensor.

Why the PA10‑U Stands Out

Sample Website Description

Autonics PA10‑U Multifunctional Sensor Controller
A dynamic DIN-rail module designed for industrial automation, the PA10‑U features dual NPN sensor inputs, 13 configurable operation modes (including delay, flicker, flip-flop, encoder), and both relay and transistor outputs. It boasts quick response, durable construction, and the ability to power sensors directly. Ideal for assembly lines, packaging, motion detection, and complex logic control in compact control cabinets.