Xinje DS5L-21P5-AS2 Xinje DS2-21P5-AS2 DS5L-21P5-AS2 AC servo motor and Driver

Here are product visuals for the Xinje DS5L‑21P5‑AS2 (with servo motor and drive) and the Xinje DS2‑21P5‑AS2 servo drive. Now, let’s get into the details you can use for your website:

Product Overview & Key Features

Xinje DS2-21P5-AS2 Servo Motor & Driver

Based on the DS2 series by Xinje, the DS2-21P5-AS2 is a high-performance AC servo drive (1.5 kW) designed to pair with corresponding Xinje servo motors:

• Power & Compatibility: Offers up to 1.5 kW output, compatible with motors having codes such as 0044, 0031, 0032, 0042, using incremental encoders (2500 ppr) elecok.com.

• Electrical Specs:

  • Input: Single-phase or three-phase AC 200–240 V, 50/60 Hz

  • Output: RMS current ~ 6 A; peak RMS current up to 18 A elecok.com.

• Control Modes: Supports position, speed, and torque control, all seamlessly switchable elecok.com.

• Performance:

  • High-speed response up to 400 Hz

  • Built-in regenerative resistor to safely manage energy during deceleration or vertical load scenarios

• I/O & Communication:

  • 5 digital inputs, 3 digital outputs

  • RS-232 communication

• Protections: Includes safeguards against overvoltage, overcurrent, overheating, encoder errors, and more elecok.comManualsLib.

Xinje DS5L-21P5-AS2 (Motor + Driver Combo)

• Although specific product sheets are limited, the DS5L series offers advanced features and design improvements over DS2, with downloadable manuals available for detailed specs Xinje Malaysia.

• Expected features include:

  • Efficient wiring designs

  • Support for AC 200–240 V single-/three‑phase input

  • Encoder feedback, parameter tuning via RS‑232 / RS‑485

  • Multi-mode control (position, speed, torque)

  • On-panel configuration and monitoring, including jogging and inertia tuning options ManualsLib.

• Ideal for CNC, automation, robotics, and precision motion systems.

How to Use – Installation & Setup

General Setup Steps

1. Mounting & Environment

   • Install the servo drive on a flat surface; maintain adequate spacing (10 mm sides, 50 mm top/bottom) for proper heat dissipation. Avoid explosive, dusty, or humid environments ManualsLib+1.

2. Power & Motor Wiring

   • Connect AC 200–240 V input (single or three-phase as per model).

   • Attach motor to U/V/W terminals, and connect the encoder (typically via DB15 or CN2 connector) ManualsLib+1elecok.com.

3. Signal & Communication Interface

   • Use CN0/CN1/CN3 connectors for digital I/O.

   • For tuning and diagnostics, connect via:

     • COM1 (RS-232)

     • Or COM2 (RS‑485/Modbus) channels ManualsLib+1.

4. Configure Modes & Parameters

   • Use DIP switches or panel buttons to select and fine-tune between control modes (position, speed, torque), perform jog runs, inertia tuning, or zero current corrections ManualsLib.

5. Connected Software

   • Use Xinje Servo Tuner, which communicates via RS‑232 or RS‑485. It allows parameter setup, monitoring, jog testing, mode switching, and factory reset (F0‑01) PLCHMI UnlockManualsLib.

6. Start-Up & Safety

   • Power on and observe status LEDs (POWER, CHARGE, alarm indicators).

   • Test basic jog and monitor response. Address any alarm codes using the manual’s troubleshooting section ManualsLibelecok.com.

Core Features & Benefits

Suggested Website Content Structure

Product Title

Xinje DS2‑21P5‑AS2 / DS5L‑21P5‑AS2 AC Servo Motor & Driver (1.5 kW)

Product Highlights

• 1.5 kW AC servo system, input AC 200–240 V (single/three-phase)

• Multi-mode: Position, Speed, Torque control (up to 400 Hz)

• Regenerative energy management and motor protection

• RS‑232 / RS‑485 communication support

• Easy to tune via panel buttons or Xinje Servo Tuner software

Ideal For

• CNC routers, laser cutters, and milling machines

• Robotic actuators or pick‑and‑place units

• Precision motion systems with dynamic load profiles

Usage Overview

1. Mount driver with proper spacing.

2. Wire power, servo motor, and encoder connections.

3. Configure control mode and parameters via panel or software.

4. Connect to PC via RS‑232/RS‑485 for tuning and jog testing.

5. Power on, monitor LEDs, perform test runs, resolve alarms.

Why Choose This System?

• Flexible control options for diverse industrial needs.

• High performance response paired with safety features.

• User-friendly setup with both manual panel and software control.

• Durable and well-protected, ensuring reliable operation.